2-Carbon 22/64" Alligator Gator Getter Bowfishing Arrow with Gator Point Muzzy

Description

You are bidding on 2-Carbon over Carbon 22/64", includes Stainless Steel Ring and Front Screw for Detach Rig, Point is not connected to the shaft. Gator Getter Bowfishing Arrow with Gator Getter Point. Condition is New.
Gator Getter Arrow with Super Nock Comes with Gator Point. Install 400lb or 600lb Line Thru Point to allow the head to detach from the bolt to minimize potential damage to the Arrow.
Insert Line from the Reel through the hole at the nock end of the Arrow. Pass the line through the hole in the Gator Point and secure with a Loop Knot to prevent Chafing. Remove the head from the Arrow and slide the Rubber Ring off the shaft. Pull approximately 6 inches of extra line through the nock end hole, double the line and pass it through the rubber ring. Slide the ring back onto the shaft with the extra line facing toward the nock and replace the head (you should now have some “slack” held under the ring so you can pull the shaft away from the head after impact). Slide the rubber ring down to where the head starts and flip an overhand loop (half Hitch) over the arrow after impact.