Firenock Aerobolt II G + Traumahawk broadhead TAC 15 / 15i / Elite / Ordnance

Description

Brand new
Firenock Aerobolt II G with Traumahawk broadhead for TAC 15 / 15i / Elite / Ordnance
Aerobolt™ II-G with Traumahawk for TAC is designed and built to be the companion bolt for TAC.  AB2-G for TAC is loaded with Firenock Advanced Components and Technologies: AeroInsert-D, Aerovane 3, AeroConcept Inner Carbon Tube, D2 polycarbonate nock, Tramuhawk broadhead and AeroConcept System.
Features of Aerobolt II-G with Traumahawk
Extra Heavy Weight - A typical Aerobolt II-G (26") with Traumahawk broadhead is ~ 585 grain which is much heavier than most 26" crossbow bolts available on the present market in order to provide the hardest hit.
Double Shaft Construction - Aerobolt II-G for TAC is equipped with unique double shaft construction. The inner shaft is a higher modular carbon which made the spine of the frontal area of AB2-G achieving 0.100" straightness. Thus AB2-G virtually does not flex much during the flight and consequently it can achieve extreme momentum and energy conservation with the result of its weight.
Fletched with Aerovane 3 - Aerobolt II-G for TAC is fletched with Aerovane™ III in 3 or 4 vanes configuration as standard to make AB2-G flying with no sound and high speed spinning.
Pre-installed with AeroInsert-D in Stainless Steel and AeroConcept System - For maximum strength and penetration power, Aerobolt II-G comes standard with AeroInsert-D (Stainless Steel, 50 grain) and AeroConcept System Innertube (5.5" of CTI300) and is ready for any FACT Technology Broadhead.
Fitted with Traumahawk - The first Blunt Force Trauma based broadhead that is not meant to simply pass through the animal, but to transfer maximum kinetic energy when impacting game.  Each Traumahawk is made of solid Stainless steel, weighs 175 grain and equipped with FACT™ Technology for perfect concentricity.
Contents:
- 3 Aerobolt II-G (26") with Aerovane III in 3 or 4 vane configuration of your choice
- 3 Traumahawk broadhead
- 7 Firenock D2 polycarbonate plain nock
Note: The final weight, shaft length and date of manufacture are hand marked on each shaft and variation of final weight between shafts is within 2 grain per order.