Firenock Titanium bolt upgrade kit for PSE TAC Cable Guide Bar

Description

Brand New
Photo 1 to 3 shown a set of Titanium kit for PSE TAC cable guide bar after installation on a TAC crossbow (Bow, rest and arrow are not included)
Photo 4 vs 5 shown  a Titanium cable guide bar vs Original one weighed in grain
Ti kit for PSE TAC cable guide bar
is designed to eliminate the rubbing of 2 cables on your TAC; which slowing your bow and causing premature string wear.  This latest kit replaces the original 2 large Aluminum bars and bumpers with 2 GR5 Titanium bars, Limb saver string stops and 2 Nylon cable rollers.  With installation of this kit, up to 5fps speed gain was recorded according to our test and lighter weight was resulted. This kit can accept either 3 or 4 vane configurations and vanes as tall as Aevovane II.
Ti Kit for PSE TAC cable guides contains:
- 2 Titanium cable guide bar with rollers and stops
- 1 Syringe of Copper Anti-Seize (3 cc)
Notes:
1. Please advise which TAC you are using:
- TAC 10 / 15 / 15i
- TAC 15 Elite / Ordnance
If you are not sure, please send us photos of your bow riser (see photo 2 for an example) and bow for confirmation.
2. Please apply Copper Anti-seize while installing your Titanium kit on your crossbow.