NEW Rocking Piston Pond Aeration Kit w/ 2-48" Weighted Diffusers 3cfm 1/2hp PUMP

Description

NOTE - THIS KIT comes with no Sink Tube or Poly Tube - priced without it so you can provide your own.  ALSO available in our store WITH Sink tube in varying lengths as well.
This Pond aeration kit is perfect for any small size pond -from less than 1/8 up to 2+ acre and up to 20+ feet deep!
Air diffusion aeration systems will circulate thousands of gallons of water and add oxygen from the bottom of your pond to the top!
Listing includes 1 - Brand NEW Rocking Piston compressor ( 2 year Warranty ) with filter, fan guards, & capacitor, &
SPECIAL TWO
48" ( 16" Diameter ) Ring Diffusers Mounted on a massive 18" square powder coated weighted base.
Pump Comes
ready to hard wire into a junction box or splice onto a power cord and begin aeration.
The compressor will need to be mounted away from any source of water - they cannot get wet! -
WE also have brand new locking cabinets available in our store!!
NEW 4' ( 16" Diameter ) Heavy Duty 1/4" thick wall - RING Tube Diffuser tubing with ""T"" fitting 1/2"x1/2"x3/8" and 2 Gear / Worm clamps Mounted on an 18"x18" Heavy Duty Powder Coated Galvanized Steel Base - Weighs a Whopping 18lbs -  Self Sinking.  Base comes with carrying handle and 4" Pole to help place in the water.
Tube measure 4' long when straight.
This is a very Thick Walled Diffuser tube and should be used as - 1 diffuser for any size pump 1/3hp and below or tee'd off with any pump larger than a 1/2hp and above up to 4 or 5 pieces ( would recommend a valve manifold to accomplish the correct air pressure to each diffuser )
GENUINE Colorite DIY Pond Aeration AeroTube Diffuser Tube
Aero-Tube™ aeration tubing Outside Diameter
. . . . . . . . . . . . . . . . . . . . . . . . . .1.00 inch Inside Diameter
. . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 inch Wall Thickness
. . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 inch Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.22 lbs. per foot Roll Length. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44 lbs. Burst Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80 PSI Optimal Air Flow. . . . . . . . . . . . . . . . . . . . . . . . . .0.4 CFM
Easy assembly in only a few minutes - Diffuser tube is Zip Tied with HDPE Zip Ties capable of zub zero temperatures and above 120°+   Pipe Handle screws into the middle holes via Philips Screwdriver.
NO Membrane- NO Backpressure!
The High-Efficiency Diffuser Tube from DIY Pond Aeration utilizes extruded EPDM Fine-Bubble tubing instead of industry-standard rubber membranes.
Compatible with
Any Compressor
over 1-CFM - which we stock and sell as well in our store!
This Diffuser package is constructed of laser cut steel, features hand slots for easy transport, made with durable galvanized steel then finished with a black powder coat - making installation quick & easy. These features will ensure this diffuser last a lifetime!
Compatible with 3/8" or 1/2" ID Hose.
Ships with a 3/8" Hose Barb installed - Simply change the barb fitting for 1/2" ID Hose ( NOT included ).
This Diffuser comes with a
LIFETIME WARRANTY
!
*
DIFFUSER FEATURES:
48" of
Premium
High-Efficiency, Fine-Bubble
Colorite Aeration Tubing
Lifts
600GPM
@ 2CFM Input
Works with 3/8" or 1/2" ID Air Hose
High Flow Design
Works in any depth profile
Virtually No Added Backpressure
Self-Sinking
Heavy-Duty Stainless Steel Clamps
-
Will not rust or corrode
Built-In Handle for
Easy Deployment
Easy to Clean and Very Low Maintenance
Effective up to 100'+
3mm Bubbles for Increased Diffusion Rate
Warranty Information
Diffuser Limited Lifetime warranty - Lifetime Warranty covers parts, materials & workmanship. Warranty does not cover physical damage, damage due to misuse or abuse.  Does not cover cleaning & maintenance. Defective part must be returned for replacement.
Compressor has a 2 year limited warranty - covers any component deemed by the manufacturer to fail under normal circumstances.  Wear parts, damage, misuse, rust, flood, fire, etc damage is not covered.
These diffusers are designed, manufactured and patented specifically for oxygen transfer and aeration efficiency.  Continuous bubble aeration tubing delivers oxygen in volumes that are unmatched by other systems, and at an energy cost that is often less than half than that of conventional systems.
The benefits of this technology include a major reduction in energy costs, significantly higher oxygen transfer rates per hour, higher dissolved oxygen (DO) levels, and an improved bottom line.
This Aeration tubing has been used successfully with a wide range of Aquaculture species and production systems.  Whether you are producing shrimp or fish, anywhere you are using traditional aeration systems to oxygenate your water, you can benefit from the efficiency and durability of this product. This Diffuser technology has numerous applications including grow out ponds, raceways, recirculating systems, hatcheries, cage culture and live-haul trucks.
In addition to aquaculture, this aeration tubing has multiple applications for all levels of wastewater management and treatment (municipal, commercial and industrial) including wastewater lagoon remediation, septic system aeration and agitation.
Subsurface aerators are a great solution for many of our customers, especially since Deep Aire subsurface aerators do not require electricity  to be in a pond. We broke down all you need to know about one of our best pond aerators to help your pond stay clean and healthy.
Subsurface aerators, or diffused aeration systems, are designed as an alternative source of aeration, taking oxygen to a pond’s lowest depth along the bottom. Diffused air systems utilize an air compressor, located on the shore, that delivers oxygen through a hose to a special diffuser lying on the pond bottom.
A submersible aerator or large pond aerator like this one keeps the pond or lake clean and healthy without a large spray pattern. A Deep Air subsurface aeration system is perfect if you’re looking for something that requires no above surface water spray, surface obstructions, or installations that prohibit the use of electricity in the water.
PERFECT FOR
Ponds on golf courses
Ponds in public places
Any body of water that needs to regulate water aeration
Anyone wanting an aerator but not a big spray pattern
Body of water installations that prohibit the use of electricity in the water
Recreational bodies of water like lakes or swimming areas.
PERKS
No electricity required at the water’s edge. Your compressor needs electricity, but the compressor can be located wherever you desire.
No floating object on the water surface enabling you to go boating or fishing
Lower maintenance and service costs due to no moving parts in the water
Safer swimming. These systems do not require electricity to be in the pond.
Eliminates thermal stratification, making it ideal for deep-water applications
One compressor aerates one long, narrow pond, or two small ponds
Improves water quality and clarity
Low operating cost.
HOW IT WORKS
These Units are a subsurface aeration system with a piston type air compressor, air hose, and an air diffuser. Designed to improve oxygen levels and destratification in deep bodies of water.
The shore mounted rocking piston compressor produces compressed air through a air tube to a membrane diffuser located on the bottom of the pond. The compressed air is released into the water through the membrane diffuser releasing thousands of fine bubbles, which rise to the surface. As the bubbles of air rise, oxygen is transferred into the water. Simultaneously, as the bubbles rise, water is pulled upward, creating a flow of water from the bottom of the pond to the surface.
THINGS TO CONSIDER
When selecting a subsurface aeration system, consider the shape, surface area, and depth of the pond. The amount of surface area the diffused system will effectively cover is dependent on the depth of the shape of the pond. The area of coverage increases the deeper the diffuser is located in the water.
The shape of a pond also affects the number of diffusers needed. An irregular shaped pond, (i.e. kidney-shaped), rectangular, or one with an island or peninsula, will require multiple diffusers to adequately disperse the oxygen.