-40%
Stator for Kawasaki Jet Ski Xi Sport 750 / ZXi 750 1996 1997 1998 1999 750ZXi
$ 54.91
- Description
- Size Guide
Description
Freeshipping in USA
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
find parts for
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Stator for Kawasaki PWC Jet Ski Xi Sport 750 / ZXi 750 / 800 SX-R 1996-2011
 
KEY FEATURES
 
Brand new aftermarket stator
Plug-and-play, direct fit, easy installation
Direct replacement to your original unit
All products shipped are tested
DESCRIPTION
 
Battery condition is extremely important. No stator can work correctly with a bad or weak battery.
Always fully charge your battery before performing any charging system tests or replacing parts.
If there is any doubt, have the battery load tested or replaced.
Brand new aftermarket stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included
Connector included
Rubber grommet included
All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Vehicle models fitment
 
Kawasaki 750 XI Sport -- 1998-1999
Kawasaki 750 ZXi -- 1996-1997
Kawasaki 800 SX-R -- 2004-2011
OEM part replacement
 
21003-3734
21003-3748
Specifications
 
Dimensions :
Interior diameter : 42 mm
Exterior diameter : 104 mm
Thickness : 16 mm
Length of wires stator to grommet : 110 mm
Length of wires grommet to plug : 1615 mm
Length of pickup coil's wire to grommet : 95 mm
Other specifications :
Number of wires :5
Number of plugs : 2
Number of pins :5
Wire to wire resistance :
Alternator : Brown to Brown = 1.2 ohms +-20%
Pickup : Blue to Green = 496 ohms +-20%
instructions
 
Before installing your new stator
Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
SHIPPING
 
We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
Videos
 
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
RaceTech Electric was founded in 2011 by three motorcycle industry veterans in San Diego, CA. The group has over 20 years combined in the Motorcycle industry.
Customer service
Part request
About us
About seller page
Add seller to favorite